Lumintop HL3A Headlamp ,2800 Lumens , 3 LEDs , 18650 Flashlight , Anduril firmware

Specifications

1. Emitter: Three LEDs on a copperDTP MCPCB e.g.
2. Optic: Standard TIR optical lens
3. Flux: 2800lm
4. Intensity: 10000 cd ANSI throw / 200M
5. Firmware: The HL3A uses free software called Anduril, distributed under the terms of the GPL v3 code is available from http://tiny.cc/TKAnduril
6. User Interfaces: 1. By default the HL3A is set to use SMOOTH RAMPING, Instant access to TURBO mode is also provided. 2.A more conventional STEPPED RAMPING UI is available if you like discrete modes level. You can choose how many steps you want.3.MOMENTARY mode is useful for signaling purposes or rapidly/briefly lighting up targets.
7. To exit this mode, physically disconnect power.4. MUGGLE mode uses a reduced output. 5. It has an electronic LOCKOUT for safety, but acts also as momentary low light.
8. Other functions: Battery check, sunset, beacon, tactical strobe, party strobe, bike flasher, candlelight, lightning storm .
9. Battery: One flat-top 18650 cell, an unprotected cell is recommended . Cell is not included. if you want the package come with the battery, please click "Here"
10. Driver: FET+7+1 drover/ ;pw [arasotoc draom while OFF.
11. Body: Aluminum with dard-coat anodizing
12. Switch: Stainless steel e-switch on the top.
13. Ingress rating: Equivalent to IPX8
14. Weight: Approximately 54g without cells.
15. Size: 33.8mm(head) * 81mm(length) * 23.5mm(tube)
16. For more instruction, please read the user manual .