Lumintop FW21 PRO Copper Flashlight, Max 10000 Lumens, 3 LEDs, Uses 21700 or 18650 Battery

The Lumintop FW21 Pro Copper Is new 21700 powered high intensity LED torch. It is compact in size, Has economic EDC style design as predecessor. FW21 Pro Copper is compatible with 21700 and 18650 via included battery tube. FW21 Pro inherits anduril firmware and has features likes smooth ramping, stepped mode setting, strobe, muggle mode, Etc.

Features

• Emitter:It is equipped with 3 x Cree XHP50.2 LED
• Optic：Aluminum Orange Peel Reflector
• Lens：Lass With Anti-Reflective Coating
• Flux：Max up to 10,000 Lumens
• Intensity：26055cd Ansi Throw ~325 m
• Driver：Fet+7+1 Driver. Low Parasitic Drain While Off
• Body：Aluminum With Hard-Coat Anodizing
• Switch：Electronic Tail Switch
• Ingress Rating：Equivalent To Ipx7
• Weight：Approximately 245 g Without Cells
• Size：40 x 102mm (Head x Length)

Firmware：The Fw21 Pro Uses Free Software Called Andúril, Distributed Under The Terms Of The Gpl v3. Code Is Available From Http://Tiny.Cc/Tkanduril

User Inerfaces:

1. By default the FW21 PRO is set to use SMOOTH RAMPING. Instant access to TURBO mode is also provide .

2. A more conventional STEPPED RAMPING UI is available if you like discrete modes level. You can choose how many steps you want.

3. Momentary mode is useful for signaling purposes or rapidly/briefly lighting up targets. To exit this mode, physically disconnect power.

4. Muggle mode uses a reduced output e. It has an electronic FOR Safety .

Battery：One Flat-Top Or Button-Top 21700 Cell. An Unprotected Cell Is Recommended. Max. Length 70.5 Mm. 

Package Included:

1 x Lumintop Fw21 Pro Flashlight

1 x 21700 battery (Optional, depends on your choice)